If you have a water heater in Bolingbrook – or anywhere in the greater Chicagoland area, for that matter – you probably don’t think much about it. As long as it works, it’s out of sight and out of mind. But what happens when it doesn’t work – when your hot water runs out too quickly or never arrives in the first place? A qualified technician can likely correct the issue, but it helps to first have some idea of the causes. Here are 3 reasons you may not have enough hot water: not the only reasons, but certainly among the most prevalent.
- Thermostat. The thermostat controls the temperature setting and ensures that the water is hot and ready to go when you need it. If the thermostat is misreading the temperature, you won’t get water of the proper temperature. It’s usually attached to the gas valve, which controls the flow of gas into the water heater (thus controlling the temperature) if there are problems with the valve, the thermostat won’t work either.
- Dip Tube. The dip tube runs from the top of your water heater to the bottom, and moves cold water from the plumbing system to the bottom of your tank. This keeps the water at the top of the tank hot and allows it to be sent into your home when you need it. If the dip tube develops a fissure or a leak, cold water will leak out into the top of the tank, turning the hot water into lukewarm or cold water.
- Burner. The main burner receives gas which is lit by the pilot light and heats the water. If the burner isn’t working, then the amount of gas feeding the fire will be lowered and may be cut off entirely. That results in reduced hot water, which you can feel whenever you turn on the tap.
There are many reasons you may not have enough hot water, beyond these three. For issues with your water heater in Bolingbrook, call upon the experts at DuAll Heating & Cooling for help. Our trained professionals are dedicated to your complete satisfaction, so don’t hesitate to contact us!
